XR10

XR10

XR10

1100'S DELRIN SLUG HOLDERS
Sale

1100'S DELRIN SLUG HOLDERS

#

These are machined delrin holders for the Pinewood Pro Tungsten weight slugs. Getting almost 100% of the weight below your axle center is important. These holders allow you to do that. Included:2 Delrin holders***There are a couple things to know before ordering, they may not fit all wheels out..

$12.00

$10.00

3/8" Tungsten Weight Slugs

#

3/8" Diameter Pinewood derby car Weights - Tungsten Cylinders x .400" Length 8 Pcs Total Weight 3.7 to 4.0 Oz, Tungsten is about 1.7 times heavier than lead and 3.2 times heavier than the no-lead weight often used on pinewood derby cars. It is non toxic.  Use a sta..

$19.50

Axial Wraith / XR10 C-hubs Anodized (Clear)

#

Vanquish Products 8 Degree Aluminum C-hubs for Axial Wraith/XR10Works specifically with Vanquish 8 Degree KnucklesHard anodized for durabilityThese will work with stock XR10 and Vanquish Zero Ackermann KnucklesLike the stock Axial C-Hubs these are machined for clocking and broached for proper fitSet..

$45.00

Egressor Assembled Shock Set

#

Our Egressor shock bodies are some of the best and most smoothest shocks on the market! We've taken it one step further by offering them fully assembled!Each Kit comes  with our Delrin Shock Bodies, RcBros Spring Cup & Spring, Traxxas seals and bladders, Axial Plastic Piston, Cap,..

$80.00

Egressor Delrin Shock Bodies

#

Do you want a smooth running shocks that don't leak like everything else on the market? You've come to the right price!Lighter and smoother, these Delrin body shocks take what we all love about a shock, and combined it into one package. Specially designed for Axial SCX10 takeoffs and there  Axi..

$40.00

Extended Zero Ackerman VP Steering Arm

#

For those running a custom steering setup sometimes the stock VP steering arm isn't long enough to accommodate your setup. Our arm is 6mm longer accommodating setups requiring the additional length for full lock to lock steering.These are made from 1/8" thick 6061 aluminum, and tapped with 3mm threa..

$10.00
Fish's XR10 Battery Mount
New

Fish's XR10 Battery Mount

#

Looking for a cheap and lightweight battery mount for your XR10? Then look no further. These 3D printed XR10 mounts ..

$25.00
PAT13 Rear Splined Weight Holder
New

PAT13 Rear Splined Weight Holder

#

Are you looking to add more weight to the rear of your XR10? These Pat13 holders are perfect for doing so! Sold as a pair, available in black only.You will need to modify the factory rear lockout or purchase the pat 13 lockups for these holders to work. They fit standard pine wood derby tungsten wei..

$16.00
Pat13 XR10 Rear lock out
New

Pat13 XR10 Rear lock out

#

Sold as a pair in black, these Pat13 rear lockouts allow the use of the rear splined weight holders. ..

$16.00

RC Bros Aluminum Servo Posts

#

Our servo posts are machined narrow with the same offset front to back to allow the same spacing no matter how you decide to mount it. Features 3mm tapped holes and machined from 6061 Aluminum you can ensure these will hold up to the abuse you can throw at it...

$6.00

RcBros Light Shock Springs

#

Shock springs can often be one of the most important things to tune when it comes to rock crawling. We've taken the most commonly used shocks in our industry as a base standard and created something readily available with an affordable price.Made in the USA these are precision wound and feature clos..

$10.00

RcBros MOA Executioner V2

#

The Executioner V2 has been through years of testing and tuning. We are happy to release one of the best packages to hit the market in some time. After accomplishing several National Podiums the geometry of our chassis was clearly proven as a winner. This was evident in the Spider chassis, followed ..

$130.00
Showing 1 to 12 of 22 (2 Pages)