RcBros Ax10 Front 4-link mount with plate
If your looking for the ultimate setup for the front of your sportmans rig, look no further.
Ideal for your 2.2s Class crawler. This plate gives you three optional positions to mount your servo. The servo can be mounted in the middle of the plate or at either end. With the servo mounted to the side there is plenty of room for your battery on the other side. This 4-link plate is a good choice if you are looking to set up a BTA steering as it frees up a lot of room behind your axle.
For the builder out there this setup also allows for a BTA steering setup but requires some skills to achieve.
Upper 4 Link Plate
Lower electronics Plate
3/8" Drop down Spacers
Hardware for Spacers
*Note Depending on servo post used, customer may need to countersink CF and run countersunk screws.