RcBros Berg Rear Axle Tube
When it comes to a stock berg tube you lack three things that are extremely important when competing; Weight, Diameter and Adjust ability. Our rear Berg tubes have all these important attributes and all the details can be found below!
Our tubes are constructed of ultra strong and lightweight 7075 aluminum with nearly the entire diameter at .45" giving you the ultimate in clearance!The tubes also feature an adjustable 4 link mount that will need to be installed by the customer (minor fab skills require, a drill and a tap are needed).
Each link mount features diamond etched degree mounts as well as a single etched mark on the axle tube which truly allows setting the link position a snap. Align both to your desired locations, mark the hole location and drill and tap. Once the first hole is set, if a second hole is desired there is room for one more.
The outer bearing is held in via a c-clip. These c-clips are a one time use clip and with that in mind we have notched the tube end for easy clip removable. 2 extra clips will be included with each order. If more are desired they are available for purchase separately.
Lastly, a spacer is included to separate the hex pin away from the bearing, this is there to keep the offset spaced out to keep the wheel from digging into the aluminum.
All these combined the entire kit comes in at 40 grams keeping the weight out of the rear allowing for ultimate tunability! Lightweight, adjustable and small in size, this is the ultimate combination!
NOTE: These will not fit the Dlux Aluminum Axle Shafts!!!
The rear tubes use a 6x11x4mm bearing if you're using CBRB axles